A Flowmeters is a expedient for measuring, monitoring, or recording the rate of flow, pressure, or extraction of a liquid, as of a gas.
An Ultrasonic Flowmeter is a type of flow meter that measures the flow of a liquid, gas or steam by using the principle of ultrasound. The flow meter can portion the median velocity along the path of an emitted beam of ultrasound, by averaging the discrepancy in measured transit time between the pulses of ultrasound propagating into and against the direction of the flow. Ultrasonic Flowmeters are affected by the pressure, temperature, density and viscosity of the flowing medium.
There are three separate types of Ultrasonic flow meters.
- Transmission flowmeters, which can be fine into In-line flowmeters and Non-Intrusive flowmeters.
- Reflection or Doppler flow meters.
- Open-Channel flowmeter.
Ultrasonic Flowmeters such as In-line Flowmeters are Multivariable Flowmeters as it is used for the estimation of liquid, gas or steam in commercial applications for the water and wastewater rehabilitation plant, chemical and petrochemical, oil and gas, power, pharmaceutical, paper, food and beverage industries.
Multivariable In-line Flowmeters, are used for Volumetric or mass flow monitoring of most liquids, gases or steam. Multivariable In-line Vortex flowmeters utilizes three primary sensing elements, a vortex shedding velocity sensor, a temperature sensor, and a pressure sensor to portion the mass flow rate of liquids, gases or steam.
In-line Vortex flowmeters operates in a following manner:
- It portion flow of liquids, gas and steam by detecting the frequency at which vortices are alternatively shed from a bluff body.
- As flow passes a bluff body in the flow stream, vortex meter, the vortices generate low and high pressure zones behind the bluff body, or shedder bar.
- In-line Flowmeters uses a piezoelectric crystal sensor to detect the pressure exerted by the vortices on the velocity sensor.
- The piezoelectric crystal converts these "pulses" into electrical signals. The meter uses a sensor designed to generate a robust sensor and to minimize inherent leaks.
In-line Flowmeters are classified into the following models:
- Pro-V™ Model M22-Vtp
- Pro-V™ Model M22-Vt
- Pro-V™ Model M22-V
- Pro-V™ Model M22-Em
- Pro-V Model M22-R
The Model M22-Vtp offers you flow computer functionality in a compact field device.
The Model M22-Vt integrates a precision 1000 Ohm platinum Rtd temperature sensor that can be used to speculate and output compressed mass reading.
The Model M22-V delivers direct reading of volumetric flow rate-generally the most cost-effective clarification for liquid flow monitoring-in applications fluctuating from general water flows to hydrocarbon fuel in flow measurement.
The Model M22 power Monitoring choice permits real-time calculations of power consumption for a installation or process. The meter can be programmed to portion steam, hot water or chilled water.
The Model M22-Redundant flowmeter offers dual flowmeters within the same pipe spool for indispensable flow applications or where a backup theory is required.
Ultrasonic Flowmeters